Archive for August, 2017

How to Remove Stains from Vinyl Floors

Lady cleaning Vinyl floor

Vinyl floor cleaning process

We all know that vinyl floors are highly durable in nature and can last for a longer time offering its beauty and charm. But when it is affected by rust stains, it is important to remove it as fast as possible before it head ahead in getting stained permanently. The actual stainless steel is not the rusting effects. But there are many factors that can cause rusting effects to your vinyl floors like any sink that is contacted with the floor or any metal strip touching the floor. Once the stains are removed from the surface, the sink will be restored again to its pristine condition. You can also use this process on your older sink that is also affected by from the iron plate. Even, there are different methods of getting rid of this situation. You can make the use of two top three different natural methods for cleaning the surface of your vinyl floors. Here are certain steps that might be helpful to you. Follow them so that you can enjoy a streak free vinyl floors in your home.

Process of removing stains from vinyl floors:

  • Start the process by remove the loose rust that you observe on the surface of your vinyl floors. If you do not prefer to use chemical cleaning solutions, start up the process by using a paper towel and damp it a little bit for wiping off any loose rust debris or pieces. This will help you in minimizing the area of scrubbing in the further steps.
  • Make the use of vinegar, as vinegar is termed to be one of the most effective stains removing cleanser. It is a natural cleaner that helps in removing the stains off the surface of your vinyl floors. Cover up the entire area that is affected by stains by using vinegar and let it rest for 5 to 10 minutes. Let it soak up the surface that is stained.
  • Well, if you’re not in a hurry for cleaning your vinyl floors, it is advisable of keeping the vinegar overnight so that it can work efficiently on its surface. The acid will work its place and will end up removing the stain that is deeply affected. You can also make the use of a non-abrasive cleaning solution that works best of removing these types of stains.
  • If you observe vinegar to fail, you can definitely make the use of non-abrasive cleaners. It is to be directly applied on the surface where it is affected by stains. Let it rest for 30 to 35 minutes so that the chemical can easily get into the surface which is affected by the stains. Scrub the area which is affected by result stains. Make sure that you don’t apply much of the pressure otherwise it will end up damaging the surface of your vinyl floors.
  • If possible, reapply the solution again if you observe that the stain is not removing off the surface. Make proper use of cleaners and rinse it properly so that you can enjoy a stain free vinyl floor in your home.

Types Of Natural Stone Tiles

various types of Natural stone tiles

Types of Natural stone tiles

Natural stone is one of the most ancient materials you can use for your homes floor. However being such ancient also, it is quite fashionable and stylish. One of the best things about natural stone tiles is that they can install in any part of your home whether it is interior or it is exterior. If you decide to for installation of natural stone tiles then you must know which type of natural stone tiles you want to go for. For choosing the one out of various types of natural stone, you need to check All of them and then decide which is the best suitable to your home. Here are some of the popular types of natural stone tiles for your home.

Types of natural stone tiles

  • Granite stone

Granite is considered as one of the hardest natural stone and this why it is used most frequently in the kitchen. Granite is manufactured from the cooling magma which is found underground. The cooling process is extremely slow and granite is building both hardness and strength as it goes in the process. Granite is made up from plenty of minerals like feldspar and quartz. This will give granite its granular texture and composition. The strength of this material is also its weakness. Granite is very hard and strong and while you are installing it subfloor should be totally leveled and it should possess enough strength to support the heavy structure of natural stone. If your current flooring is having bumps or if it has tiny valleys, granite tiles are such that they will crack that easily. Granite natural stone tiles are beautiful and have varied choice in color along with tough surface and can take wear and tear comfortably from the normal lifestyle but it is heavy and needs proper support.

  • Marble stone

Marble is such natural stone which is made up from limestone crystallizes. This made from the result of high temperature and high pressure formed underground. This natural stone will become hard and dense as it gets crystallized. The hardness of this natural stone will be polished and smoothed at the time of the process. Just like the other natural stones, marble also need to be applying a protective sealant before using it. It must be maintained properly and must also be applied again for protecting it and maintaining it regularly. Marble is more susceptible to staining and hence you have to clean the floor instantly before you after any spills to avoid any essential damage. If the marble floor is left untreated with things like fruit juice, alcohol or any such products then it will stain your floor.

  • Slate stone

This natural stone is formed in the earth very deep as shale having right combination of pressure and heat. These types of natural stone have bit of dull and unfinished and uneven look. They are available in plenty of color and design choices. These types of natural stone will give more of a rustic and modern look.

How to Remove Vinyl Floors

Peeling off the Vinyl floor

Vinyl floor sheets peeling process

Although vinyl floors are among the best option of flooring that is perfectly suitable, still there are many reasons that might turn up the situation of removing the vinyl floors and replace it with the other. Although vinyl floors are longer lasting and highly durable, over the time it can get wear and tear and can also get damaged. In addition to that many a times home owners replace the floors simply because it is too old to use anymore. Regardless to the reason of removing the floor, removing the vinyl floor is bit more time consuming and a carefully process to be performed. You need to be patient enough for removing the vinyl floors off the surface of your floor.

While performing the project of removing the vinyl floors, it is advisable to be careful so that you don’t end up damaging the subfloor installed in your home. If damaged, it is important to repair it before you lay down any of the new flooring option in your home. Here are certain tips and steps on removing the vinyl floors. Make sure to follow them for performing the project in a better way.

Process of removing vinyl floors:

  • It is important to remove each and every thing that is placed in the room. Remove any of the furnishing and appliances that you have installed in your home. Remove any of the appliances that are placed on your vinyl floors.
  • Now, it is the time for removing any of the trim around your vinyl floors. Don’t forget the baseboard. If you’re planning of using the trim again, it is advisable of carefully using a flathead screwdriver for prying up the trim as well as the baseboard away from the walls. It is advisable of removing any nails that are attached to the trim.
  • Remove any of the stapes, tacks and nails that you observe on the edges of the floor. Pry them out. Make the use of small hammer or small prier for performing the process. It is advisable of removing the tacks and nails from the edges so that it don’t end up getting interrupted to the process.
  • Maintain the safety measures so that you do not end up stepping up on any of the nails or tack pieces on your floor. Now, it is the time for pulling off the vinyl sheets off the surface of the floor. Identify the corner where the vinyl is not glued and target that section for pulling off the vinyl sheets. Make the use of a putty or utility knife for cutting off the strip so that you can easily remove the vinyl sheets off the surface of the floor.
  • Scarp up the adhesive off the vinyl sheets. Make the use of scraper, so that you can pull off the sheets into pieces. Clean the floor before you apply or lay another layer of the flooring option. Once you remove the majority of the vinyl off the surface of your floor, make the use of vacuum for cleaning the floor so that you can lay your new floor again.

Tips on Eco-friendly Building Materials

Eco-friendly Building Materials

Different types of Eco-friendly Building Materials

Are you interested in constructing a sustainable home for you? Choosing eco-friendly building materials is one of the most important parts of the construction process. Using eco-friendly materials, specifically referring to the materials made out of renewable sources should be used over the hybrid construction materials as they have the less impact in saving up the environment. Using eco-friendly materials are important as it helps in not only a green home construction but it is also suitable and appropriate to your surrounding environment. Selecting them as your building materials take a lot more than just buying the things and items that have the organic label embossed on it. It is advisable of taking some of the time out and decide of which things and building materials you’re using in your home construction. Make sure that you’re really building an eco-friendly home or not. Here are certain ways of identifying that you’re using eco-friendly products and building materials for the concern of your home construction.

Eco-friendly building materials tip:

  • Using recycled materials for the construction of the home is one of the important points to be considered. It is among the benchmark that is suitable to home construction. It is advisable for looking for the materials that have been prepared out of recycled contents.
  • This is one of the best ways to identify that the building materials you’re using is appropriate and not depleting the integrity of your surroundings. For example: Use old tires. They are typically used in the construction of green building for piping system, baseboard installation, and many a times for insulation.
  • Even you can salvage metal and recycle it as it is among the most durable material that helps in protecting the home premise. It is important to use steel which contains approximately 60 to 7 percentage of recycled contents. Even, using aluminum is among the good option, but as it is the term for using recycled contents, it is advisable of reading the instructions first before you start using them for your eco-friendly building construction.
  • It is advisable of using natural materials that are highly suitable for the construction of eco-friendly homes. Wood is among the great example that can be used in the form of eco-friendly materials. Not because they are eco-friendly products but because it is highly durable and excellent source of natural resource.
  • It is advisable of selecting solid form of wood while selecting it because it will be free from solvent glue and formaldehyde. If possible go for selecting the wood which is harvested and domestically grown around your area. They are highly impressive and very sturdy for the use. Even using agricultural byproducts for the purpose of decorating your home is among the good option for increasing the eco-friendly value of your new home.
  • Make the use of corn husks, sorghum stalks and grass stubble for making your home look naturally beautiful without inviting any of the manmade aspect so that it doesn’t end up affected the process of constructing an eco-friendly home.
All Rights Reserved. Copyright 2008-2009. ConstructionInvivo.com