Archive for the ‘Drainage Systems’ Category

Tips on Detecting Plumbing Leaks in Home

Plumbing leak in drainage pipe

Plumbing leak observed in pipe

If you observe or detect any plumbing leak in your home, it is important to detect and investigate further of it as soon as possible. Leaving the plumbing leaks unattended and undetected might prove to be wasteful and damaging and can also lead to corrode the plumbing pipes by damaging it up to major extent. As plumbing leaks has the tendency of even damaging the electronic appliances installed in your home. Not only appliances but also the energy consumption bills, it surely will attend to rise up in your energy bills because of constant flow of water from the pipes. Make sure you keep everything intact when you detect any plumbing leaks in your home. Cover each and every electrical appliance so that it doesn’t end up damaging the costly appliances. Here are certain tips on detecting plumbing leaks that might prove helpful for the home owners. Make sure to follow them and get rid of plumbing situation in your home.

Plumbing leaks detecting tips:

  • It is not a huge task of identifying the plumbing leaks, you can simply start the process by listening carefully to the pipes installed. Turn off the main water supply that offers water to the entire home. Don’t forget to turn off the sprinkles and the water hose attached in the exteriors of the home.
  • After turning them off, listen to the noise or any dripping sound of the water. If you hear the dripping of water continuous, it is advisable to identify the leak and try to fix it as soon as possible. You can also detect any plumbing leak by checking the water meter installed in your home.
  • It simply looks like a plastic box that is situated in the home. If you’re living in an apartment, then you must find it on either of the side of the home. If you observe the number of the water meter is moving faster and the digits are getting higher, even if the water supply is turned off, then it simply indicated towards a water leak.
  • Make the use of radar for detecting any plumbing leak in your home. Generally, radar is highly recommended if you think that the plumbing leak is simply coming from the exteriors of the home. Radar is used for identifying the exact leak and the area which is needed to be repaired. It also helps in indicating that the plumbing leak is huge in size of small.
  • Radar works in sending up the waves that passes through many of the materials and send back the signal to the machine. Even, there is a special type of instrument that is used for measuring the returning speed of the waves from the machine. This will help you in identifying which type of material is damaged in your plumbing system.
  • Have you ever tried filling the water lines by gas? It is one of the best trick that helps in identifying any plumbing leak. Fill up the plumbing pipes by gas and detect the exact place where the leak is.

How to Fix a Leaking Toilet

Animated image of Leaking Toilet

Leaking Toilet preventing tips

Are you fed of those increasing rates in your energy consumption bills and those frustrating sources of leakage? It might also cause a rise in your water consumption bills to be much higher than it actually should be. Therefore, if you simply observe a leaking toilet, it’s advisable of repairing it right away. Many a times it is observed that a leaking toilet might lead in even damaging the flooring option installed in your bathroom.

If you’re thinking, repairing a leaking toilet is a difficult task, well it’s not folks. Here are certain tips that offer a better help in repairing and fixing a leaking toilet. Follow these handy tips for getting rid of toilet leaks that might prove harmful for your bathroom.

Leaking toilet fixing tips:

  • When it comes for leaking toilet, there are many causes for the same. But amongst all the common causes of a leaking toilet are the issues of water line supply. Either it’s not fixed or installed properly or is not completely sealed.
  • But by replacing the inlet of the water lines on time and regularly, it offers you with many advantages of fixing a leaking faucet by simply treating it well by using some Plumber Teflon tapes or by simply using a wrench for fixing it.
  • So, it’s advisable of storing a roll of Teflon Tape in your toolbox and a pair of adjustable wrench. In most of the cases, these are the only two useful tools used for fixing a leaking toilet inlet hose.
  • Don’t even over tighten the connection fittings observed in your toilet. As we all have made up our mind that tighter seal always works best in plumbing system. But, many a times, it is simply not the case you’re thinking. For example: When dealing with the toilet inlet hose, you need to be extra careful because if the toilet inlet is tightening a bit more, it might result in damaging effects.
  • Don’t over tighten the compression nut fixtures. Even, this tip is beneficial and applied when you’re installing flapper assembly or flush valve in your toilet. When you’re fixing these types of fixtures in your toilet, it’s advisable of tightening it only up to hand tight and not to make the use of wrench for tighten it.
  • One of the easiest ways of finding any leak in your toilet is by making the use of food color. If you observe any bad wax sealing in the base of your toilet, you can easily confirm it by adding a little amount of food color in your toilet flush tank. Let it stay for some while and if there’s any leak it will turn the color you added in flush tank. And if it’s not, simply understand, there’s no leak in your toilet.
  • You’ll simply observe the food color on your bathroom floor. This result in showing a virtual sure sign of damaged wax ring installed in your toilet. Check for the wax ring carefully because it might be the leaking spot for the home owners.

How to Install Vinyl Roof Gutters

Different Vinyl gutter options

Two people watching for Vinyl gutters

Roof gutters are among the important parts of your home’s plumbing system because it helps in keeping the moisture attraction out of the reach of basement and the foundation of the home. You drainage system should be properly graded and guarded as other components of your home. There are different materials used in the construction of gutters like steel, aluminum and vinyl. For the home owners, vinyl roof gutters are designed for fulfilling all the wishes of yours. Vinyl roof gutters performs a fine job of challenging water and supplied with many benefits. They are inexpensive and can be easily afforded by the home owners. Even, installing vinyl roof gutters is easy and can be performed averagely by any home owners.

Vinyl roof gutter installation:

You’ll need the stated tools for installing your vinyl roof gutters:

  • Chalk line
  • Tape for measuring
  • Tooth hacksaw
  • Levels
  • Hangers
  • Vinyl gutters
  • Downspout
  • corners
  • connectors
  • Screwdriver bits
  • Ladder
  • Rust resistant/ sealant
  • Power drill

Start the process by designing the actual pattern of installing your vinyl roof gutters. For catching the water running off the roof surface, your vinyl gutters should be installed in such a way that helps in draining up the water directly away from the home premise. Even your vinyl roof gutters should slightly be angled from end to end, so that the water can flow directly to the bottom surface and then away from your home premise.

It’s on you, decide how you want the water to flow, because it’ll need specific gutter connectors. It’s advisable of emptying your downspout to a hard surface area in your home like a driveway that is already designed for flowing off the water. Probably you won’t want the water to flow into your neighborhood or not into any natural spot at your home. Start the process by measuring the area in your home. Generally vinyl roof gutters come in 11 to 12 foot of parts. Combine the parts with the measurements for determining the exact size and the pieces of gutters you’ll need.

Now, start installing the vinyl gutters. Measure the end of the gutters away from the downspout location and leave the space at least for half an inch and mark up the area. Move to the downspout end and measure up the same distance and mark it up. Make sure the marks are leveled to each other. Don’t forget that roof gutters are installed in a downhill position. Snap a chalk line between the upper and the lower mark. With the help of chalk line you’ll be able to install the components of your roof gutters correctly.

With the help of a ladder, get the component of your vinyl roof gutters to the roof and install the gutter corners and outlet carefully. Don’t forget to install the joints, brackets and the hangers for the support. Snap each and every part of the gutter to its marked places as per manufacture’s direction stated in the instruction manual of the vinyl gutters purchased from the market.

Tips on Preventing Frozen Plumbing Pipes

Frozen plumbing pipe

Image of frozen plumbing pipes

Plumbing pipes are very important to be maintained in the home because if not maintained and taken proper care, it might results in bursting or clogging situation. It might increase up the expenditure of the home owners. And most probably, plumbing pipes should be checked and maintained in winters. Winters tend to turn your active and functioning plumbing pipes into frozen pipes. It might also lead in bursting up. Knowing exactly how to prevent plumbing pipes from freezing is like a lifesaver. Decided to stop your plumbing pipes from freezing? Well, all these stated tips will help you in preventing the frozen plumbing pipes at your home. Follow the tips before the cold weather climate arrives at your door step!

Frozen plumbing pipes repairing tips:

  • It’s advisable of shutting off the valve, supplying water from the outer most water lines. Individual water supply lines running outside to the home has generally shutting valves on the inner side of the home. It’s advisable of draining the outside lines by opening the tap and keep it open for some while.
  • It’s recommended of keeping it open because as long as the tap it open, it won’t let the situation of frozen water enter up your plumbing pipes. Even a small amount of water in the pipes of outer lines might lead in getting frozen water.
  • Before the winters are setting, it’s advisable of insulating your plumbing pipes right away. Start insulating your plumbing pipes. Those plumbing pipes running through uncovered heating spaces should be covered proper by applying insulation.
  • This also includes the plumbing pipes running through the interiors of the home. It’s advisable of performing pipe sleeved insulation. It is shaped according to the copper pipes. It’s among the inexpensive method for covering your plumbing pipes. And if you’re short of time and money too, you can insulate the plumbing pipes simply by fiberglass insulation that might help you in curing your cause.
  • Even, there are different types of electrical heating tapes that are meant and designed for heating the plumbing pipes before it runs frozen. They are designed for wrapping around the pipes that helps in acting like little electric blanket for preventing the plumbing pipes from freezing.
  • Well, according to me, it’s much more effective as compared to the insulation. But, for the home owners with fewer budgets, it is a bit expensive option to try. If you haven’t had a chance to insulate your plumbing pipes and facing a sudden cold snap, a short term solution is beneficial for the home owners.
  • Leave the tap water running for some while. Leave it running on a slow speed for preventing the freezing effects. It’s not appropriate to water the water just like that; you can easily collect the water for reusing by keeping a container at the bottom surface of the tap. Collect the water in it for prevention of water in your home. And if you’re tackling with a damaged plumbing pipe, repair it immediately before it can cause damaging effects and show up with an increased ratio over the expenditure.

 

How to Fix a Leaky Faucet at Home

Person repairing a Leaky Faucet

Leaky Faucet repaired by a home onwer

The annoying noise of dripping water is worst amongst all, isn’t it? Even there are many drawbacks of a leaky faucet like continuous irritation and increase in water bills at your home. But, fortunately it’s now very easy for fixing the leaky faucet. It’s considered one of the DIY processes of fixing a leaky faucet. Identify the type of faucet and get your materials and tools. Here are the steps on fixing a leaky faucet at your home.

Fixing a leaky faucet:

  • Turn off the water in your faucet. Look for the shutting valve and head forward of shutting it off. It helps in preventing water damage while working on the leaky faucet. Plug up the drain for stopping the water flow into the drains.
  • Determine and understand which type of faucet you’ve installed in your sink. There are different types of faucets available. Understand yours and get one. Get the materials and tools according to the faucet you consist of.
  • Remove each and every handle and pry it off the decorative cap of the faucet if necessary. Make the use of a screw driver and remove the handle. Make the use of a wrench for removing the nuts installed.
  • Pull off the stem, it will help in exposing off the O ring present in the faucet. Take it off with you to the store for finding the exact replacement for the same. Now, replace the seat washer installed in the O ring. Also carry the old seat washer to the store for getting an exact one.
  • Reassemble the handle again to its place. Now, replace the ball faucet by starting with the replacement kit. There are different parts in ball faucets that might be needed to be replaced. The replacement kit is cheap enough for the home owners to be purchase.
  • Unscrew and remove the handle and lift the handle upwards for placing it aside. It’s also advisable of using pliers for removing the collar or the cap. Remove the spring and the inlet present in the cap.
  • Make the use of a needle nose plier for removing it off. Now, replace the O ring purchased from the store. It’s advisable of purchasing new valves, cam washers and spring for installing it back into your leaky faucet.
  • Reassemble the handle again after fixing the spring in the cap. It will help in functioning and getting rid of the leaky faucet observed in your home. For fixing a cartridge faucet, remove off the handle gently and unscrew the nuts and screws attached to the handle.
  • Remove off the retaining clip if you find it necessary to. It helps in holding the cartridge on its place when the faucet is functioning.
  • Pull towards the upper side for making it stand straight up. Set aside the faucet spout and remove off the O ring. Replace the O ring you observe with the new one and make the utility knife for stamping it on its place.
  • Reassemble the parts again on its place and have a leak and drip free faucet at your home.

Cheap Ways of Cleaning Plumbing Drains

Person cleaning Plumbing Drain

Plumbing Drain cleaned by a home owner

Drain cleaners come in different chemicals and ingredients that are actually harmful for the person using. Well, some extra strength plumbing drain cleaners are simply labeled with the tag of poison on the bottle or the container. But, using these cleaning solutions are also beneficial for dissolving the hair clogged in the plumbing drains of bathroom and kitchen. There are many safer ways of cleaning the plumbing drains at your home. Here are the tips and cheap ways on cleaning the plumbing drains.

 

 

Plumbing drain cleaning tips:

  • Home remedial cleaning solutions prove to be most useful when it comes for cleaning the plumbing drains. The most basic drain cleaning solution is the mixture of white vinegar and baking soda and simply pouring it down the drains and the pipes.
  • The carbon dioxide air bubble that arise due the chemical reaction helps in scrubbing inside the plumbing drains, and the expanded air helps in pushing off the blockages down the plumbing pipes.
  • Remember that how some bacteria in yogurt are supposed to maintain the things running smoothly? The same thing is carried when the bacterial solution is prepared and waved off the drain pipes.
  • The enzymes and the bacterial solution help in breaking off the fats and other junk that is blocking up your drain pipes. Bacterial solution helps in removing off the junk from the pipes but doesn’t dissolve the hair. So, it might not be effective on the hair that has become the blockage in your plumbing drains.
  • If you’re drains are completely stopped for use, you can simply try air cleaner for cleaning them. Air cleaners are one type of compression of air that is forced into the plumbing pipes. It functions like in sealing around the space of your drains sand shoots air directly into the clogged drain.
  • The force applied by the air against the water helps in unclogging the plumbing pipes at your home. The air cleaners consist of long barbs sprouting hands for grabbing the hair present in the plumbing pipes.
  • The best part of using it, it just cost approximate to 2 to 3 dollars which is nothing in comparison to its functions and work. It’s a Zip it tool used for pulling off the hair from the drain pipes.
  • After removing the hair, add baking soda to the pipes. Pour at least half a cup of baking soda down the drain and quickly add white vinegar to the drains. And shut off the drain. It will stop the air for breaking up the reaction from adding baking soda into the drain pipes.
  • It’s also advisable of adding hot water to the drains, but make sure you have rested the baking soda and mixture of vinegar for more than 30 minutes into the drains. Wait till thirty minutes and pour hot boiling water down the drain lines.
  • It will help in chasing the clogged pipe by cleaning the drains in an accurate manner. Once again pour normal water to the drains and enjoy a clog free plumbing system in your home.

Tips on Cleaning clogged Drains Easily

Clogged drain cleaned by using a bend hanger

Cleaning a Clogged drain

We all are familiar with the warning signs of clogged drains. Basically the sink takes a longer period of time for draining. You can identify easily by noticing the water pool around the shower area. And how can we forget the unpleasant and strange odors. The odors are the reason of pooled water observed in the bathroom. Well, these are certain symptoms or warning of a clogged drain that you might be facing sooner or later. If you don’t take proper steps of preventing it right away, one day it will be BOOM!! And you end up with clogged drains at your home. Clogged pipes are something to be deal on early pace, otherwise it might even results in bursting of pipes. So, start the process of cleaning clogged drains by removing the excessive hair and junk you observe build up on the surface of the sewage.

Cleaning the clogged drains tips:

Mixture of white vinegar and baking soda:

One of the most common types of solution for cleaning the clogged drains is using vinegar and baking soda. Take the help of measuring cup and mix 1/4th cup of white vinegar and 1/4th cup of baking soda in equal proportion and mix it well. Pour it into the drains and let it rest for some while. Rinse it by flowing off water into the drains and the issue of clogged drains is sorted hence.

Make the use of Wire hanger:

Haven’t heard about wire hanger? Yes, it’s definitely useful in cleaning the clogged drains. Make the use of regular wire coated hanger and make it straight. Bend up one of the end from a side and make a hook out of it. Push it into the drain pipes and start fishing through it. You should be able to get all sorts of nasty things and hair out of the draining pipes. Pull them off right away and clean your clogged drains.

Caustic soda:

Caustic soda is not an easy solution for dealing with. There are many safety measures to be considered before using it for clearing a clogged drain. Wear your eye protection and put your rubber gloves on. It might even cause chemical burns, so it’s advisable of protecting yourself first. Make the mixture by adding 4 cups of caustic soda in a bucket filled with cold water. Stir it well and pour it through the drain pipes. It will help in unclogging the drains easily.

Use boiling water:

One of the easiest tips of cleaning a clogged drain is by using boiling water for cleaning it. It is helpful in cleaning it very easily and quickly too. Take a bowl and add some water to it. It’s advisable of heating the water in microwave. Boil the water as much as you can hold in your hands. Pour it down the drainage pipes slowly in 3 to 4 stages. It will help in allowing the hot water to work its way in cleaning the clogged drains. It’s amongst the most flexible and easiest way of clearing the junk away from the drains.

How to Extend Downspout for Better Home Drainage

Extended downspouts from the roof

Extended downspouts in garden

Generally, rain gutters are designed for channelizing water off the roof and downspouts are designed for funneling that water away from the home premise. But, unfortunately, the water isn’t always carried far away and disaster can easily occur. If short downspout and heavy rains are causing the pool of water near the foundation of your home, it’s even worse than just a little flooding situation. Even there are chances that your foundation might get compromised. An extended downspout is perfectly suitable fort such situation. In fact if you observe water seeping into your home foundation directly, this is one of the problem or issue that you must correct immediately. Water seepage into the home can lead to many different problems like mildew, dry rot and mold. Fortunately, extended downspout is one of the best options for getting rid of this situation. But first you’ll need to purchase certain tools and materials for installing an extended downspout at your home.

Install extended downspout:

  • First of all, purchase a brand new length of extended downspout that is suitable and matches exactly to your old ones. It is advisable of measuring the diameter of your existing downspout for getting the right size.
  • If the area which you have decided for placing the extended downspout is not getting enough of foot traffic, you can also add a simple extension of pipe. And if you have planning of using a splash block, simply place it underneath the downspout.
  • Splash block is constructed for directing the water directly onto the lawn and away from the home premise. Eventually, you might be wishing of placing a permanent splash block underneath the extended downspout, but a removable or adjustable downspout helps in allowing you to take it away is not necessary.
  • And if the existing downspout is located in the area where you can observe more amount of foot traffic, such as driveways, walkways and patios, it might get necessary for making certain special arrangements.
  • Add up the space by attaching a roll up sleeve. A roll up sleeves placed on the end of the existing downspout which is installed. It will help the water to sufficiently extend it to allow for drainage away from the home premise. Generally, roll up sleeves are perfect for those areas that requires remaining unclutter.
  • This objects helps in fitting exactly on the edge of the downspout. When it rains, the roll up sleeves unrolls for allowing the downspout and gutters for channelizing the water away from the foundation and the roof of your home.
  • After it stops raining, and the water stops draining, the roll up sleeves automatically rolls back again to its actual position. Another option that helps in installing an extended downspout is by extending a downspout in an area that is required of remaining open is the swing up elbow.
  • If the home owner installs one at the end of the downspout, then you can easily flip it up and out of the way whenever you are in need of.

How to Improve your Drainage System

Home Drainage System

Drainage System – Roof gutters

If you are suffering from the problems of clogged or overflow gutters, it’s probably not necessary for replacing the whole gutter. In fact there are many things that can help you in improving your drainage system, without having to take the old ones down and put the new ones. Some things don’t involve gutter at all, but certain things surrounding your home premise that might cause damaging effects in your gutters installed. Here are tips on improving the drainage system at your home.

 

Drainage system improving tips:

  • Check for the obstacles you are facing in your drainage system. If your gutters aren’t working properly, it might be cause of clogged gutters and drainage pipes. Leaves are one of the most common gutter problems that you might observe in your home.
  • Look for the trees grown nearby your home and make sure that the branches aren’t hanging down to touch the gutter installed. It not only deposits more amount of leaves throughout the growing season and the fall that can help you in preventing water flow, but also the weight of the branch can loosen the gutters or can even knock them off completely.
  • Not to mention the damage of a low-hanging branch can do to your roof installed. It is advisable of trimming the back low branches for preventing and improving your drainage system.
  • If you don’t have trees that are depositing leaves in to the drainage system and you’ve also removed any low hanging branches, you probably don’t want to crave back the trees so far that nothing extends over the surface of your roof.
  • You might opt to do this depending upon the situation you’re facing. But still if you want to keep your trees intact, then try to keep the leave out of the rain gutters by adding the gutter guards on the tops surface of the gutters.
  • One of the most affordable barriers is using gutter screen. Home owners can easily install it without any helps of expertise by simply following the given instructions. For improving a better drainage system, it is advisable of preventing ice dams from growing in your gutters.
  • Guttering can’t prevent the accumulation of ice dams that form from a poorly ventilated attic space. When the insulation installed in the attic doesn’t reach to the edges and the attic space isn’t well ventilated for allowing humidity for escaping, it can lead for condensation on the inner side of the roof.
  • The ice or snow blocks from running off the roof as it’s stopped at the ice dams. But the ice dam problem caused by filled in ice and snow can be prevented by installing gutter covers, specially designed for keeping them out.
  • Try to keep the rain gutters and the drainage system neat and clean. Even if you have gutter grate that helps in preventing larger leaves and twigs from entering into your gutters, even the smaller items can easily stop the water flow. It is advisable of cleaning the gutters at least twice a year for improving and enjoying a better drainage system at your home.

Gutter Protection: Low Maintenance Tips

Cleaning your roof Gutters

Removing debris from roof gutters

It’s true that whenever we think of gutter maintenance, we picture long hours of gunk cleaning and sweat and grime. But now you can use some great ways to lower the maintenance costs and also reduce the workload. A clean and neat environment is required for healthy living and matters like gutters and other outside elements also affect the health of you and your family. Therefore, it’s not a matter of child’s play.

There are many products available, which can be sued to keep gutters clean. You can invest in a wire mesh and put it over the gutter to keep extra dirt, seeds, twigs, stones and leaves or insects to jam the gutter. This will save you a lot of time. Gutter plates and sheaths are available in almost all hardware stores or malls. Just buy these and fit them in your gutter to save time and extra burdens.

All Rights Reserved. Copyright 2008-2009. ConstructionInvivo.com