Process of Sealing Rubber Roofing

Person performing the process of sealing Rubber roof

Sealing rubber roof process

Many of the home owners find rubber roofing as one of the best option of roofing system. Even, there are many of the benefits that can be availed to the home owners like it is helpful in not letting the water accumulated of the surface and also helps in preventing the growth of mold and mildew on its surface. The rubber tiles or shingles which are used in the roof are environmental friendly in nature as compared to other roofing materials. It also requires less amount of maintenance and care as it is highly durable and sustainable in nature.

Even the rubber shingles are sturdy and strong enough that can be stable for a longer period of time on the surface of your floor. It is even a great option of roofing for stormy and rainy areas. As compared to other roofing shingles like metal and asphalt, rubber roofing shingles are less heavy so the cost of transporting from other place is minimal to the home owners. Even the chances of breaking is very less as it is the material that is highly flexible in nature and protects the interiors of the home from unwanted water. If you’re worried about the colors and designs, well, there’s nothing to worry about as there are varied choices of colors and patterns are available. You can select your color according to the exteriors and the color of your home. This will help you in placing a matching concept of your home. But, let me tell you, rubber roofing shingles are more expensive as compared to those of other roofing shingles. If you’ve installed rubber roofing in your home, make sure that you seal it completely so that the water doesn’t transport to the interiors of the home. Here are certain steps on sealing your rubber roof that might prove to be helpful for you! Make sure iof following them for the best results.

Sealing rubber roofing shingles:

  • Begin the process by cleaning the seams of the roof. Make the use of a broom for cleaning the seams where you observe the overlapping tiles of the rubber roof. You might find accumulated dirt in these joints. Removing it is important so that you can enjoy a clean roof.
  • Don’t forget to clean the underneath sections of the tiles. It’s advisable of cleaning all the exposed portion of your lower rubber by using cleaning pads and solvent. After cleaning the lower lapping section, don’t forget to clean the upper overlapping layer too.
  • Make the use of rubber tape primer on the surface of the rubber roof. Apply it on the cleaned surface. It’s advisable of using stiff bristle for applying it on the surface. Let it be dry and leave unless and until the entire area of patch is dry.
  • Make sure you fix the rubber shingles firmly with the rubber tape. Open the ends and press it gently and push it a little so that it can seal completely on the surface. Nail it of you think it is important for your rubber roof.

 

Leave a Reply

All Rights Reserved. Copyright 2008-2009. ConstructionInvivo.com